ePOWER B-TEC 100Ah and 125Ah, Lithium Battery with Bluetooth™

The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Monitor your battery from your smart phone with our Bluetooth™ App available for download as either Android™ or Apple™ platforms.

Bluetooth™ Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Bluetooth™ Monitoring Technology. By downloading the Android™ or Apple® app to your smart phone or tablet device, you can monitor the following information;

Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information

The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor, balance and optimize each Prismatic cell within the battery during normal operation.

It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings:
Lithium v AGM Capacities
100Ah Lithium = 160Ah AGM
125Ah Lithium = 200Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Lithium Power Pack Systems which can offer unlimited parallel/series connections, run large inverter loads and sizing from 200Ah and above .


Read more on Facebook