We now have the perfect solution to monitoring levels of your black and grey water tanks.

This ingenious system from Gobius installs on the OUTSIDE of your tank with no holes required to be drilled. As the sensors are on the outside of the tank they don’t get clogged up which results in misleading readings!!

Thanks to the measurements from the outside of the tank, you do not have to remove it to make holes in your tank. Many other products on the market today have gauges which have sensors that go inside your waste tank and this can often lead to problems. With Gobius, there is no risk of leakage. The Gobius system is delivered as a complete system including display, sensors, cables, control unit and instruction
Very easy and quick to install
All settings are done automatically
No need for removing the tank
No drilling of holes in the tank
No cleaning inside the tank
No maintenance
For all these tank materials
Stainless steel, 1-3 mm
Steel, 1-3 mm
Aluminium, 2-5 mm
Polyethene, 2-12 mm
Fibre Glass, 4-8 mm
Tecnical information
Coloured LED show lamps the levels
Extremely low electricity consumption, < 40 mA
Support 12-24 Volts
Easy to connect to analouge gauges from Wema, Faria, VDO…
Supports 10-180 Ohm, 240-33 Ohm and 4-20 mA
By using an adapter also supporting NMEA 2000
Easy to integrate with EmpirBus NXT
Can also be integrated with Ontech GSM module to get alarm on your mobile phone
Extra alarm signal when the tank is empty and full
Sizes
Panel (display), 60 x 60 x 4 mm
Control Unit, 160 x 130 x 26 mm
Sensor, 70 mm diameter, 27 mm height
Panel cable, 1,5 m (std), 10 m
DC cable, 1,8 mm
Sensor cable, 1,0 m (std), 3, 5, and 10 m
Analog cable, 0,5 m
Sensor tape, 3M 4632, 45 mm diameter